NESS RC

NorthEast Sportsman Series Racing Club

NESS Flamethrower
(Lighted T-Jet)

Chassis Specifications
Aurora T-jet chassis copper only
Modification to Chassis and gear plate – none
Weights – not allowed on chassis or body
Mounting use 2 existing holes in chassis

Magnets
stock T-Jet only, shimming allowed, plastic or non-ferrous shims

Armature
stock t-jet arm only 16 OHM minimum
balancing allowed
no truing

Gears
stock only (crown may be aftermarket)
Pinion Gear – 9 tooth only

Electrical System

Any copper shoe- no ski
Brushes – copper composite flat brush only may be scored

Axles
Rims front- Double Flange 1" wide independent or solid allowed
Rims rear– Plastic double flange rear
Shimming allowed inside and outside of chassis
Axles – open, no carbide

Tires
Front and Rear Tires - Slip on silicone only.
Minimum front tire height .350
Minimum rear tire height .360
Maximum tire width 1”

Bodies
Any Aurora (t-Jet type) , Johnnie Lightening, model motoring , dash, etc.
Injection molded, no resin, no Lexan
No Body weighting allowed
Body must have front and rear glass
Convertible must have all cockpit components
Minimum body weight 3.5 grams